Technical Specifications
Key specifications for each product line, taken from the manufacturer’s datasheets. Click a product to expand its table.
Confirm critical values before ordering — custom sizes and tempers are available on request.
Copper-Tin Alloy Wire
| Grade | Tin content (%) | Temper | Wire dia. (mm) | Tensile strength (N/mm²) | Elongation (%) | Conductivity (%IACS) |
|---|---|---|---|---|---|---|
| 0.15%Sn | 0.10–0.20 | Hard | 2.60 | ≥465 | ≥0.2 | ≥85 |
| 0.15%Sn | 0.10–0.20 | Hard | 0.90 | ≥490 | ≥0.2 | ≥83 |
| 0.30%Sn | 0.25–0.35 | Hard | 2.60 | ≥480 | ≥0.2 | ≥75 |
| 0.30%Sn | 0.25–0.35 | Hard | 0.90 | ≥520 | ≥0.2 | ≥73 |
| 0.60%Sn | 0.55–0.65 | Hard | 2.60 | ≥540 | ≥0.2 | ≥60 |
| 0.60%Sn | 0.55–0.65 | Hard | 0.90 | ≥580 | ≥0.2 | ≥59 |
| 0.70%Sn | 0.65–0.75 | Hard | 2.60 | ≥560 | ≥0.2 | ≥57 |
| 0.70%Sn | 0.65–0.75 | Hard | 0.90 | ≥600 | ≥0.2 | ≥56 |
| 1.35%Sn | 1.30–1.40 | Hard | 0.90 | ≥800 | ≥0.2 | ≥40 |
| 4%Sn | 3.5–4.5 | Hard | 0.90 | ≥800 | ≥0.2 | ≥15 |
Minimum continuous drawing diameter: 0.020 mm.
High-Strength Copper-Magnesium Alloy Wire
| Grade | Mg content (%) | Tensile strength, hard (N/mm²) | Tensile strength, annealed (N/mm²) | Conductivity, hard (%IACS) | Conductivity, annealed (%IACS) | Typical applications |
|---|---|---|---|---|---|---|
| 0.2%Mg | 0.2±0.05 | ≥450 | ≥220 | ≥75 | ≥82 | High-tension magnet wire, automotive wire |
| 0.4%Mg | 0.4±0.05 | ≥600 | ≥240 | ≥62 | ≥75 | Railway catenary & contact wire, speaker leads, audio specialty wire |
| 0.7%Mg | 0.7±0.05 | ≥700 | ≥260 | ≥50 | – | Airborne antennas and similar fields |
Fully RoHS-compliant. Can be silver- or nickel-plated and drawn to ultra-fine diameters.
Copper-Silver Alloy Rod, Profile & Wire
Drawn round bar: Φ0.5–8 mm. Five standard grades by silver content; processes: up-cast bar, extruded bar, drawn round bar.
| Grade | Code | Cu+Ag (%) | Ag (%) | O ≤ (%) | Conductivity (%IACS) ≥ | Density (g/cm³) |
|---|---|---|---|---|---|---|
| CuAg(03) | TUY-03 | 99.95 | 0.02–0.04 | 0.0030 | 98 | 8.9 |
| CuAg(08) | TUY-08 | 99.95 | 0.06–0.10 | 0.0030 | 98 | 8.9 |
| CuAg(10) | TUY-10 | 99.95 | 0.08–0.12 | 0.0030 | 97 | 8.9 |
| CuAg(20) | TUY-20 | 99.95 | 0.15–0.25 | 0.0030 | 97 | 8.9 |
| CuAg(30) | TUY-30 | 99.95 | 0.25–0.35 | 0.0030 | 97 | 8.9 |
Hardness: extruded bar 60±5 HV; drawn bar 110±5 HV.
- Dimensional precision: extruded ±0.05 mm, drawn ±0.005 mm
- Straightness up to 1 mm/m
- Dense, defect-free structure — no porosity, delamination or inclusions
- Bright surface with excellent oxidation resistance
High-Strength High-Conductivity Copper-Silver Wire
| Grade | Ag content (%) | Temper | Wire dia. (mm) | Tensile strength (N/mm²) | Elongation (%) | Conductivity (%IACS) |
|---|---|---|---|---|---|---|
| 0.10%Ag | 0.08–0.12 | Hard | 0.90 | ≥450 | ≥0.2 | ≥96 |
| 0.60%Ag | 0.6±0.1 | Hard | 0.90 | ≥500 | ≥0.2 | ≥91 |
| 1%Ag | 1±0.1 | Hard | 0.90 | ≥550 | ≥0.2 | ≥90 |
| 2.5%Ag | 2.5±0.2 | Hard | 0.90 | ≥600 | ≥0.2 | ≥88 |
| 4%Ag | 4±0.4 | Hard | 0.90 | ≥750 | ≥0.2 | ≥82 |
| 6%Ag | 6±0.6 | Hard | 0.90 | ≥780 | ≥0.2 | ≥80 |
0.10%Ag: rectifiers, flame-retardant and heat-resistant cables. 0.60%–6%Ag: defense and specialty fields, extreme-environment network cable, heat-resistant and medical wire & cable, miniature voice coils, microphone coils and other electronics. Meets ASTM B624-2007 (2017).
Precision Electrothermal Alloy
- Copper-base heating alloy for operating temperatures below 300°C
- Minimum drawable diameter: 0.02 mm
- Conductivity range: 15–90% IACS
- Patented in-house process
Typical uses: heated blankets, heated gloves and vests, induction cooktops.
Precision Magnetic Alloy & Copper-Base Elements
| Size range | Temper | Tensile strength (MPa) | Yield strength (MPa) | Elongation (%) | Hardness (HV) |
|---|---|---|---|---|---|
| 0.4–3 mm | H02 | 350–410 | ≥340 | ≥3 | 100–120 |
| 0.4–3 mm | H04 | 380–450 | ≥370 | ≥2 | 110–130 |
| 0.4–3 mm | H06 | 410–480 | ≥400 | ≥1 | 120–135 |
| 0.4–3 mm | H08 | 440–500 | ≥420 | ≥1 | 120–140 |
| 0.5–3 mm | O (annealed) | ≤255 | – | ≥25 | ≤80 |
| 0.5–3 mm | H02 | 255–365 | – | – | 80–120 |
| 0.5–3 mm | H04 | 380–480 | – | – | 110–135 |
Strong magnetic permeability with high conductivity; drawable to 0.02 mm. Built for signal reception and shielding. Copper-base element materials (heat dissipation / heat exchange parts) can replace beryllium copper — custom per drawing.
Silver-Based Alloy Material
| Alloy | Ag content (%) | Temper | Wire dia. (mm) | Tensile strength (N/mm²) | Elongation (%) | Resistance (Ω/m) | Solidus (°C) | Liquidus (°C) |
|---|---|---|---|---|---|---|---|---|
| Ag45Cu | 45±0.5 | Hard | 0.08 | 500–800 | 1.0–3.5 | 4.414–4.687 | 780 | 880 |
| Ag45Cu | 45±0.5 | Hard | 0.10 | 500–800 | 1.0–3.5 | 2.745–2.915 | 780 | 880 |
| Ag45Cu | 45±0.5 | Hard | 0.14 | 500–800 | 1.0–3.5 | 1.472–1.564 | 780 | 880 |
| Ag45Cu | 45±0.5 | Hard | 0.20 | 500–800 | 1.0–3.5 | 0.706–0.750 | 780 | 880 |
| Ag45Cu | 45±0.5 | Hard | 0.25 | 500–800 | 1.0–3.5 | 0.440–0.460 | 780 | 880 |
| Ag45Cu | 45±0.5 | Hard | 0.32 | 500–800 | 1.0–3.5 | 0.272–0.292 | 780 | 880 |
| Ag50Cu | 50±0.5 | Hard | 0.09 | 500–800 | 1.0–3.5 | 2.888–3.066 | 780 | 875 |
| Ag50Cu | 50±0.5 | Hard | 0.10 | 500–800 | 1.0–3.5 | 2.728–2.926 | 780 | 875 |
| Ag50Cu | 50±0.5 | Hard | 0.25 | 500–800 | 1.0–3.5 | 0.440–0.460 | 780 | 875 |
| Ag72Cu | 72±0.5 | Hard | 0.14 | 500–800 | 1.0–3.5 | 1.200–1.270 | 779 | 779 |
| Ag72Cu | 72±0.5 | Hard | 0.25 | 500–800 | 1.0–3.5 | 0.385–0.410 | 779 | 779 |
| Ag72Cu | 72±0.5 | Hard | 0.32 | 500–800 | 1.0–3.5 | 0.235–0.247 | 779 | 779 |
For vacuum brazing (carbide tools, copper & copper alloys, brazed tubes), fuses and conductive slip rings.
- Uniform composition, stable performance, excellent cleanliness
- Alloy additions customizable to customer requirements
- Small-batch, diversified customization available
High-Purity Oxygen-Free Copper (TU0 / C10100)
| Grade | Cu content (%) | O content (%) | Wire dia. (mm) | Temper | Conductivity (%IACS) | Typical applications |
|---|---|---|---|---|---|---|
| TU0 (C10100) | ≥99.99 | ≤0.0005 | 0.03–20.00 | Annealed | ≥101 | Vacuum electronics, high-end power, magnet wire, audio equipment internal wiring |
Tinned Copper & Copper Alloy Wire
| Type | Size (mm) | Dia. tolerance (mm) | Elongation (%) | Conductivity (%IACS) | Tensile strength (MPa) |
|---|---|---|---|---|---|
| Bare copper wire | 0.03–0.32 | ±0.003 | ≥10 | ≥98 | ≥220 |
| Tinned round copper wire | 0.03–0.32 | ±0.003 | ≥10 | ≥93 | ≥220 |
| Cu-Sn alloy tinned wire | 0.02–0.32 | ±0.002 | ≥6 | ≥75 | ≥350 |
| Cu-Sn alloy tinned wire, hard temper | 0.02–0.32 | ±0.002 | ≤2 | ≥73 | ≥600 |
For ultra-fine Teflon electronic wire, coaxial cable, high-end headset wire and carbon brush wire.
Tinned Copper & Copper Alloy Stranded Wire
Multiple tinned copper or copper-alloy wires (typically 7, 19 or more) twisted in one direction; S-twist or Z-twist constructions.
| Stranding machine | Single-wire dia. range (mm) | Max. strand area (mm²) | Lay length range (m) | Spool (mm) |
|---|---|---|---|---|
| 130P | 0.02–0.03 | 0.035 | 0.8–1.6 | φ130 |
| 200P | 0.04–0.26 | 0.035 | 0.94–15.97 | φ200 |
| 300P | 0.05–0.28 | 0.45 | 2–18.8 | φ300 |
| 500P | 0.08–0.45 | 2.5 | 6.3–52.3 | φ500 |
Silver-Plated Copper & Copper Alloy Wire
| Product | Base material | Nominal dia. (mm) | Tensile strength (N/mm²) | Dia. tolerance (mm) | Elongation (%) | Conductivity (%IACS) |
|---|---|---|---|---|---|---|
| Silver-plated copper wire | Pure copper | 0.016–0.025 | ≥196 | ±0.001 | ≥6 | ≥6 |
| Silver-plated copper wire | Pure copper | 0.03–0.05 | ≥196 | ±0.002 | ≥6 | ≥6 |
| Silver-plated copper wire | Pure copper | 0.05–0.10 | ≥196 | ±0.003 | ≥10 | ≥10 |
| Silver-plated copper wire | Pure copper | 0.10–0.23 | ≥196 | ±0.005 | ≥15 | ≥15 |
| Silver-plated copper wire | Pure copper | 0.23–0.50 | ≥196 | ±1% d | ≥20 | ≥20 |
| Silver-plated copper wire | Pure copper | 0.50–2.60 | ≥196 | ±1% d | ≥25 | ≥25 |
| Silver-plated copper alloy wire | Copper alloy | Same as above | ≥400 | Same as above | Same as above | Same as above |
Coating grades A–E with 1.25%, 2.50%, 4.00%, 6.00% and 10.00% silver content. Uniform, continuous coating with strong adhesion; smooth surface free of silver particles, burrs and mechanical damage. For consumer electronics, medical, communications, aerospace and military cable.
Data from the manufacturer’s datasheets. Confirm critical specifications before ordering. Need something outside these ranges? Ask us.
Need Something Outside These Ranges?
Small-batch customization is available across wire, stranded, and alloy products.
Ask Us